New
Tracker · D2 Steel
10" D2 CARBON COATED TRACKER WITH PREMIUM LEATHER SHEATH-T9
$29.99
10" hand-forged D2 Carbon Coated Tracker with a Wood & Resin handle and a cowhide leather sheath.
Blade length5 Inches
Handle length5 Inches
Blade materialD2 Steel
Handle materialWood & Resin
Hardness55-58 HRC
24-Hour Dispatch
Hand-Forged Since 2013
Free U.S. Shipping $100+
SKU DK-T9 · In stock
Wholesale
| Buy | Per unit | Savings |
|---|---|---|
| Wholesale | Create an account to see price | |
What's included
Everything you need to put this blade to work on day one.
D2 Carbon Coated Tracker
Cowhide leather sheath.
Hand-forged D2 Carbon Coated Tracker with a Wood & Resin Handle
Built at the anvil.
Built at the anvil.
Meant to be used.
We forge the old way: heat, hammer, and patience. Each blade is shaped at the anvil, heat-treated for hardness and edge retention then ground and finished by hand. This piece starts with D2 Steel. The Blade's profile is ground for control and a working edge. Build details: Grip: Wood & Resin. Blade size: 5 inches. Hardness target 55-58 HRC for a balance of bite and toughness. Ships razor sharp knife with the sheath or bag listed in what's included.
Hand-forged blade
Wood & Resin ergonomic grip
Cowhide leather sheath
55-58 HRC
Razor-sharp edge
Technical
Specifications
The numbers that matter. Length, steel, handle, and hardness stamped the way a maker would write them.
SKU
DK-T9
In stock
Forge Spec Plate
| Blade length | 5 Inches |
| Handle length | 5 Inches |
| Blade material | D2 Steel |
| Handle material | Wood & Resin |
| Hardness | 55-58 HRC |
| Blade type | Tracker |
| Included | D2 Carbon Coated Tracker · Cowhide leather sheath. |
Care & Guarantee
Built to be used.
Built to be used.
No shortcuts.
We forge blades that get used. Hand wash, dry, and hone to keep the edge ready.
- Hand wash with mild soap and warm water.
- Dry immediately.
- Do not put this blade in the dishwasher.
- Oil the blade lightly after drying to guard against surface rust, especially in humid climates.
- Wipe the handle clean & avoid harsh solvents.
Questions
Yes. Every blade is forged and finished by hand at Forging Shop.
This model uses D2 Steel, heat-treated to about 55-58 HRC.
Full Tang. The tang is part of the strength you feel in hand.
Wood & Resin, shaped for a secure working grip.
Tracker, Choose the profile that matches how you cut.
Yes. It ships razor sharp and ready to use.
Knife, Cowhide leather sheath.
Hand wash, dry fully, and oil carbon or Damascus steels lightly. See the care section on this page.
Free Standard Shipping applies only to U.S. addresses on orders over $100. International orders are not eligible. In-stock orders dispatch within 24 hours.
From the forge
Knife Care & Sharpening
Leather absorbs moisture from the air, and if a knife or blade is stored in a leather sheath for an extended period in a humid environment, it can lead to rusting. The moisture trapped in the leather can transfer to the blade, promoting oxidation and corrosion. To prevent this, it is important to:
- Store the knife in a dry place. Avoid high humidity areas.
- Remove the blade from the sheath if storing long-term. This reduces the risk of moisture buildup.
Same Category
Shop Everyday Carry
You may also like
New
Hand Forged
10" Hand-Forged D2 Knife with G10 Handle, Mosaic Pin & Leather Sheath
D2 Knife with G10 handle
$39.99
Hand Forged
Carbon-Coated D2 Hammered 5-Piece Chef Set with Leather Bag (Red Handle)
Polished D2 steel Chef set with Resin handle
$63.00
New
Hand Forged
8" RAIN DROP PATTERN DAMASCUS STEEL BLANK BLADE CD2
Hand-forged Rain Drop Pattern Damascus Blank Blade
$19.99
New
Hand Forged
10" DAMASCUS KNIFE WITH PREMIUM LEATHER SHEATH-I15
Hand-forged Damascus Knife with a Micarta Handle
$24.99
$29.99
Added to bag
